CE164-4-PT-CA:
Foundations of Electronics II
2022/23
Computer Science and Electronic Engineering (School of)
Colchester Campus & Apprenticeship Location
Spring Special
Undergraduate: Level 4
Current
Monday 16 January 2023
Friday 30 June 2023
15
16 June 2022
Requisites for this module
(none)
(none)
(none)
(none)
CE266
BENGH610DA Electronic Engineering
This module is the second of two concerned with scientific and engineering foundations on which electronics is based. It builds on the fundamentals treated in Foundations of Electronics I to discuss the principles on which frequency sensitive components operate in circuits, along with the principles and applications of electromotive devices, diodes, transistors, and OpAmps.
The aim of this module are to study frequency dependent, electromotive, and semiconductor components in circuits and how their properties can be calculated and designed. Basic properties of active circuits and the principles of feedback are introduced, and these are illustrated in laboratory practical work.
Upon completion of this module, students should have extended their understanding of electronic principles to handle basic transient and frequency responses in simple RC, RL or RLC networks and to be able to design a simple negative feedback amplifier. They should also be able to demonstrate understanding of the principles and applications of electromotive devices, diodes, transistors, and OpAmps.
After completing this module, students will be expected to be able to:
1. calculate capacitance or inductance for simple component geometries
2. find the transient response of an RC or RL network
3. explain how diodes and transistors work
4. design a simple regulated power supply using zener stabilization
5. analyse or design electromotive parameters of a transducer
6. apply phasors to analyse R/L/C networks
7. design and analyse shunt or series negative feedback amplifier
Outline Syllabus
Surface charge and capacitance. Fundamentals of AC signals and concept of r.m.s. quantities.
Dynamic behaviour of inductances and capacitances; series and parallel combinations. Basic RC and RL networks, transient response to a step impulse.
Phasors, and radian frequency. Steady-state sinusoidal responses. Analogue filters and frequency responses of RC, RL, and LCR circuits. Phase lag and lead, and the relation to energy dissipation and storage. Power measurement. LCR circuits and resonance.
Electromotive force (EMF), DC motors and DC generators.
Diodes and transistors: types; physical principles; characteristic curves; operational ranges
Lectures, Classes and Laboratories
This module does not appear to have a published bibliography for this year.
Assessment items, weightings and deadlines
| Coursework / exam |
Description |
Deadline |
Coursework weighting |
| Coursework |
Progress Test |
|
25% |
| Coursework |
Assignment 1 |
|
25% |
| Coursework |
Assignment 2 |
|
50% |
| Exam |
Main exam: In-Person, Open Book (Restricted), 120 minutes during Summer (Main Period)
|
| Exam |
Reassessment Main exam: In-Person, Open Book (Restricted), 120 minutes during September (Reassessment Period)
|
Exam format definitions
- Remote, open book: Your exam will take place remotely via an online learning platform. You may refer to any physical or electronic materials during the exam.
- In-person, open book: Your exam will take place on campus under invigilation. You may refer to any physical materials such as paper study notes or a textbook during the exam. Electronic devices may not be used in the exam.
- In-person, open book (restricted): The exam will take place on campus under invigilation. You may refer only to specific physical materials such as a named textbook during the exam. Permitted materials will be specified by your department. Electronic devices may not be used in the exam.
- In-person, closed book: The exam will take place on campus under invigilation. You may not refer to any physical materials or electronic devices during the exam. There may be times when a paper dictionary,
for example, may be permitted in an otherwise closed book exam. Any exceptions will be specified by your department.
Your department will provide further guidance before your exams.
Overall assessment
Reassessment
Module supervisor and teaching staff
Prof Francisco Sepulveda, email: f.sepulveda@essex.ac.uk.
Professor Francisco Sepulveda
School Office, email: csee-schooloffice (non-Essex users should add @essex.ac.uk to create full e-mail address), Telephone 01206 872770
No
No
No
No external examiner information available for this module.
Available via Moodle
Of 61 hours, 33 (54.1%) hours available to students:
27 hours not recorded due to service coverage or fault;
1 hours not recorded due to opt-out by lecturer(s), module, or event type.
Disclaimer: The University makes every effort to ensure that this information on its Module Directory is accurate and up-to-date. Exceptionally it can
be necessary to make changes, for example to programmes, modules, facilities or fees. Examples of such reasons might include a change of law or regulatory requirements,
industrial action, lack of demand, departure of key personnel, change in government policy, or withdrawal/reduction of funding. Changes to modules may for example consist
of variations to the content and method of delivery or assessment of modules and other services, to discontinue modules and other services and to merge or combine modules.
The University will endeavour to keep such changes to a minimum, and will also keep students informed appropriately by updating our programme specifications and module directory.
The full Procedures, Rules and Regulations of the University governing how it operates are set out in the Charter, Statutes and Ordinances and in the University Regulations, Policy and Procedures.