CE721-7-SP-CO:
Electronic System Design and Integration
2023/24
Computer Science and Electronic Engineering (School of)
Colchester Campus
Spring
Postgraduate: Level 7
Current
Monday 15 January 2024
Friday 22 March 2024
15
24 July 2023
Requisites for this module
(none)
(none)
(none)
(none)
(none)
MSC H612CH Computer Engineering,
MSC H61012 Electronic Engineering,
MSC H610CH Electronic Engineering,
MENGH613 Electronic Engineering,
MENGH614 Electronic Engineering (Integrated Masters, Including Placement Year)
This module provides first-hand experience of the design simulation and production of complex electronic circuits. A word specification is provided for a consumer electronics device for which a prototype is designed using reference and first principles.
The circuit is then simulated and tested in Multisim to verify operation. Once satisfactory, a hardware prototype is developed on a prototype medium e.g. breadboard and tested in real-world conditions. Then using PCB design software, a PCB is designed and populated to produce the final product.
The aim of this module is to introduce the fundamentals behind PCB design, procurement and population. Boards will be designed and prototyped on simulators such as Multisim and students will experience the complete design cycle from description to testing.
After completing this module, students will be expected to be able to:
1. Design a complex electronic circuit from reference and first principles
2. Perform complex analysis of electronic circuits in simulators exemplified by Multisim
3. Design construct, produce and critically evaluate PCB based system
4. Populate test and fault find a printed circuit board
5. Demonstrate basic hand skills
6. Demonstrate proficiency in testing electronic systems
Outline Syllabus
1. The use of reference and legacy circuits in the design of an electronic system
2. PCB production cycle
3. Transient, impulse, DC, AC, frequency and noise analysis using Multisim
4. Fourier analysis
5. Iterative design loop
6. Auto and manual placement and routing of electronic components
7. PCB layout considerations and constraints
8. PCB board inspection and validation
9. Soldering and basic hand skills
10. Prototyping of electronic circuits using breadboard, wirewrap and veroboard
11. Testing and validation
12. Analogue and digital modelling
13. The use of fast prototyping for housing and containers
Lectures and laboratories
The above list is indicative of the essential reading for the course.
The library makes provision for all reading list items, with digital provision where possible, and these resources are shared between students.
Further reading can be obtained from this module's
reading list.
Assessment items, weightings and deadlines
| Coursework / exam |
Description |
Deadline |
Coursework weighting |
| Coursework |
Assignment 1 |
|
50.00% |
| Coursework |
Assignment 2 |
|
50.00% |
Exam format definitions
- Remote, open book: Your exam will take place remotely via an online learning platform. You may refer to any physical or electronic materials during the exam.
- In-person, open book: Your exam will take place on campus under invigilation. You may refer to any physical materials such as paper study notes or a textbook during the exam. Electronic devices may not be used in the exam.
- In-person, open book (restricted): The exam will take place on campus under invigilation. You may refer only to specific physical materials such as a named textbook during the exam. Permitted materials will be specified by your department. Electronic devices may not be used in the exam.
- In-person, closed book: The exam will take place on campus under invigilation. You may not refer to any physical materials or electronic devices during the exam. There may be times when a paper dictionary,
for example, may be permitted in an otherwise closed book exam. Any exceptions will be specified by your department.
Your department will provide further guidance before your exams.
Overall assessment
Reassessment
Module supervisor and teaching staff
Dr John Woods, email: woodjt@essex.ac.uk.
Dr John Woods
School Office, email: csee-schooloffice (non-Essex users should add @essex.ac.uk to create full e-mail address), Telephone 01206 872770
Yes
No
Yes
Dr Marios Angelopoulos
Bournemouth University
Principal Academic
Dr Dimitrios Kanoulas
UCL
Associate Professor
Available via Moodle
Of 66 hours, 0 (0%) hours available to students:
0 hours not recorded due to service coverage or fault;
66 hours not recorded due to opt-out by lecturer(s), module, or event type.
Disclaimer: The University makes every effort to ensure that this information on its Module Directory is accurate and up-to-date. Exceptionally it can
be necessary to make changes, for example to programmes, modules, facilities or fees. Examples of such reasons might include a change of law or regulatory requirements,
industrial action, lack of demand, departure of key personnel, change in government policy, or withdrawal/reduction of funding. Changes to modules may for example consist
of variations to the content and method of delivery or assessment of modules and other services, to discontinue modules and other services and to merge or combine modules.
The University will endeavour to keep such changes to a minimum, and will also keep students informed appropriately by updating our programme specifications and module directory.
The full Procedures, Rules and Regulations of the University governing how it operates are set out in the Charter, Statutes and Ordinances and in the University Regulations, Policy and Procedures.