WebTips

T0-T1000

T0101: Setting the device number

National Instruments cards have a device number that is greater than zero. Use the National Instruments Measurement and Automation program to find the device number.

T0102: DAC channel selection

With National Instruments cards, DAC channel numbers start at zero. Different DAC have different numbers of channels.

T0102: Setting DAC signal ranges

The range of possible values is DAC-dependent

T0110: DAC channel input options

The options are:

• 0 = differential mode, which uses 2 lines (e.g. 0 and 8, 1 and 9)
• 1 = signal and AI ground
• 2 = signal and AI sense

T0120: DIO line selection

With National Instruments cards, DIO line numbers are normally in groups of 8 and are numbered from 0 to 7.

T0130: CT (counter-timer) selection

The two National Instrument cards currently used to provide counter-timers are the PCI 6601 (4 CT lines numbered 0 - 3) and the 6602 (8 CT lines numbered 0 - 7).

[Top of page]

T1001-T2000

T1001: Fo measuring pulse settings

See Measuring pulse settings Dialog.

T1002: Setting the actinic measuring pulses

See Measuring pulse settings Dialog.

T2001-T3000

T2001: Palette options

T2002: Automated data mapping

T3001-T4000

T4001-T5000

T5001-T6000

T6001-T7000

T7001-T8000

[Top of page]